What are the production of diy silicone teething bracelet manufacturers-bottle opener keychain
t as awareness or inspirational item.
It is very popular among sports players. Let us see several kinds sports bracelet.
Glow in dark silicone wristband is popular for night event. But it is also good for night walk or run. A glow in dark silicone wristband can glow green or blue after absorbing strong light energy. The glow will fade gradually in about 3h and will recover absorbing light again.
A mosquito repellent silicone bracelet is very useful to protect ourselves from the mosquito outdoor. It is made from high quality silicone together with lemongrass, lavender, clove and other natural plant oils. And the natural plant oils is the reason why it is mosquito resisting.
Usually sport player has bigger size of wrist than most of us. So we have to choose the right size.
There are 6”(150mm) for toddler, 7”(180mm) for youth, 8”(202mm) for adult and extra large of 210mm, 250mm in circumference and 1/4”(6mm), 1/2”(12mm), 3/4”(19mm), 1”(25mm) in width. We make it all together 2mm thickness.
UV silicone bracelet is a good choice for out door activities or sports like Climbing, rock climbing, cliff descent, kayaking, diving, sailing and so on. A UV silicone bracelet can transfer it’s color darker under sunshine when absorbing UV light. It transfer to purple or blue normally which indicating the strength of the UV index. Wearing it on the wrist is a good way to avoid long time bottle opener keychainstaying under strong sunshine.
avant-garde and popular. Among them, no big-name stars use it as their decorations, making you cool and full of flavor! As for the production process of silicone wristband, it is estimated that not many people have fully understood it. Pinshang Silicone explains the whole production process of silicone wristband.
Design of artwork
The design of artwork is generally based on the size of the sample artwork provided by the customer. Graphic drawing software, such as CDR or AI software, is generally used to make the artwork. If the customer cannot provide the sample artwork, we can cooperate with the customer to complete the design and production of the artwork free of charge according to the customer"s requirements.
The mold opening is that the mold master creates an offset plate according to the designed artwork, then uses the offset plate to carve a copper worker, and finally carves a steel mold with the copper worker. Some hand ring craft moulds have a relatively high technical content and take a relatively long time to produce. Generally, the mold opening period is calculated by five days. With the mould, the production will be quick.
According to the color number on the international Pantone color card specified by the customer, our color mixing ratio is aligned and the color difference is minimal.
The materials required for each wristband are weighed by an electronic scale. Generally, the wristband weighs about 5.5 grams.
Upper die production
After the mould is finished, it is produced on the machine. After the mold is installed, the machine needs to be warmed up. A 9-mold machine produces about 15000 pieces per day.
Afterbottle opener keychain the wristband is produced, the product shall be inspected and checked, mainly to see if it meets the specifications. If it does not meet the specifications, it will be discarded.
Each wristband is produced with a residual edge. After the quality inspection department passes the inspection, the product is sent to the post-process department for trimming. (Average trimming quantity per person per day is about 3,000 pieces).
Finished product inspection
After the edge is repaired, the finished product is obtained. It is also necessary to send the finished products back to the quality inspection department to check the trimming quality. If there are any unqualified products, they will be scrapped.
After the repaired products pass the inspection, they shall be packaged according to the customer"s requirements. Packaging is divided into PP bag independent packaging and naked packaging. Both are 100 pieces in a pack. Usually 20 packs per carton (2,000 pieces) are standard export containers. Packing is generally required by customers.
Inspection before sealing
After the packaging is completed, the quality inspection department will check the quantity. if there is no problem, seal the case and send it to the warehouse for delivery.